Klinion Kliniderm Debride and Debride Pocket
Intuitive Design, Gentle Effective Debridement
With an intuitive design Klinion Kliniderm Debride enables a gloved hand or finger to be placed into the product giving the clinician greater control during debridement.
Wound bed preparation is a key element to ensuring optimum wound healing and wound debridement removes barriers such as non-viable tissue, biofilm and foreign material and/or debris from the wound bed.
Mechanical is the most common form of debridement as it is quick, safe and effective with no spcialist training required.
Mechanical is the most common form of debridement as it is quick, safe and effective with no spcialist training required.
Klinion Kliniderm Debride is designed to provide rapid, gentle, mechanical debridement. Its intuitive design is double sided with a soft continuous edge, the product is placed over a gloved hand or finger enabling improved handleability and control during debridement.
Product Benefits
Indications
Klinion Kliniderm Debride is suitable for the treatment of superficial wounds (acute and chronic) and the surrounding skin of the following wounds:
Klinion Kliniderm Debride has a strong cleaning efficiency, effective bacterial binding and very high degree of biofilm disruption and removal. It allows for soft debridement without tissue irritation and has a soft haptic application.
Applying Klinion Kliniderm Debride and Debride Pocket
1. Soak Klinion Kliniderm Debride with approximately 50-60ml (for Kliniderm debride pocket use 10-20ml) of wound cleansing solution (e.g. saline or distilled water), follow local guidelines.
2. Applying gentle pressure, wipe the moistened side over the wound and/or surrounding skin in a circular motion.
3. Dispose according to local procedures and guidelines
Directions For Use
Klinion Kliniderm® Debride and Klinion Kliniderm® Debride Pocket can be used interchangeably. The pocket size is recommended when treating small wounds or when extra control is needed, while the debridement pad is recommended for treating large-sized supercial wounds. Mechanical debridement with the Kliniderm® Debride is best achieved following the directions below:
1. Soak Kliniderm® with approximately 50-60ml of wound cleansing solution
2. Applying gentle pressure, wipe the moistened side over the wound in a circular motion
Dressing Change and Removal
1. Klinion Kliniderm® Superabsorbent can remain in place for up to 7 days, dependent on the condition of the patient and the level of exudate
2. Replace Klinion Kliniderm® Superabsorbent when the dressing has reached its absorbent capacity or whenever good wound practice dictates that the dressing should be changed
3. Gently remove the dressing from the wound bed and dispose according to local procedures and guidelines. If removal appears to be difficult, saturate the dressing with sterile saline solution
4. If required, irrigate the wound site according to good wound care practice
Precautions
Storage
The products should be stored under ambient conditions, in the original packaging. In a cool, dry and well ventilated place, away from direct sunlight.
In case a serious incident has occurred in relation to the device: Inform Medeco BV as listed on the packaging, your local distributor and your local healthcare authority.
Ordering Details